Xerox 6180N Using LCDS Print Description Language - Page 202

Using logical processing Logical processing command descriptions Logical processing commands cause the system to test input data records in the job against specified criteria. If the criteria are satisfied, the system performs specific actions. The commands described in the following sections provide logical processing functions. The following table summarizes the logical processing commands and the functions that are associated with them. Table 3-12. Summary of commands associated with logical processing functions Command Specifies BANNER Specifies the number of consecutive banner pages the system must detect before it recognizes the end of the report. RAUX Specifies test for feeding a page from the tray configured with the AUX stock. RDELETE and RSELECT RDELETE: Specifies a test for deleting a record. RSELECT: Specifies a test for selecting a record. RFEED Changes stock names on a page basis without using DJDEs. ROFFSET Specifies a test for offsetting a page in the stacker. RPAGE Specifies a test for repositioning a logical page. RRESUME and RSUSPEND RRESUME: Specifies a test for resuming printing. RSUSPEND: Specifies a test for stopping printing. RSTACK Specifies a test for detecting the end of a report. BANNER command Specifies the number of consecutive banner pages the system must detect before it will recognize the end of the report. The BANNER command includes a test expression to detect and count the header or trailer pages that are used to separate reports. Banner pages are header or trailer pages that separate printed reports from each other in the stacker. Header pages are found at the start of a report; trailer pages are found at the end of it. 3-22 Using LCDS Print Description Language