Xerox DC240 DocuColor 240/250 Training and Information Guide in PDF format. - Page 10

DocuColor 240/250 Hole Punch Option Kit This kit enables the additional finishing capability of hole punching to the Advanced Office Finisher or Professional Finisher (with Booklet Maker). Auxiliary Interface Device This kit enables the use of a third party accounting device such as a card swipe or coin operated unit to control the use of print, copy and scan functions. Consumables There are several Consumables included in your machine. The machine will inform you when you need to order a new module and when to install it. Drum Cartridges The Drum Cartridges will provide approximately 30,000 images. The machine display and this documentation will enable you to successfully install the new cartridges so you do not have to wait for a service call. Toner Cartridges The toner cartridges will provide approximately 15,000 prints at 6% area coverage. Supplied with the toner cartridge is the waste toner container. Fuser The fuser will provide approximately 100,000 prints or copies. Waste Toner Container The waste toner container will need changing after approximately 30,000 prints or copies at 6% area coverage. Charge Corotron The machine display and this documentation will enable you to successfully install the new Charge Corotron so you do not have to wait for a service call. Control Panel The Control Panel is divided into four areas: Touch Screen, Pathway buttons, Keypad and Feature buttons. The touch screen allows you to select all the available programming features. It also displays fault clearance procedures and general machine information. The actual touch screen will vary depending on the pathway buttons selected and the options available on your machine. The touch screen also displays important messages about the current condition of the machine, no matter what pathway has been selected. DocuColor 240/250 Training and Information Guide 10