Xerox DC240 DocuColor 240/250 Training and Information Guide in PDF format. - Page 12
Sleep Mode, Power Saver
View all Xerox DC240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
DocuColor 240/250 Sleep Mode In this mode, the power is lowered more than in the Low Power mode. The touch screen goes out, and the Power Saver button on the control panel lights. To use the machine, press the Power Saver button. The Power Saver button goes out to indicate that the Power Saver feature is canceled. In both Low Power Mode and Sleep Mode the touch screen is blank and the Power Save indicator light is on. The machine is re-activated if the touch screen or any button on the control panel is touched, the Document Handler is loaded, a paper tray opened, a job is submitted to the print queue (fax receive or network print), or a fax or print job arrives in the print queue. The machine responds within one second and all the features are available within 30 seconds from Low Power Mode or 120 seconds from Power Save Mode. NOTE: The machine will not exit Power Save Mode if a fax job arrives and the fax enabled paper trays are empty. The job will be held in memory until either the control panel is touched or paper is loaded. In addition to the power save modes your system administrator can enable Auto Off. This feature automatically switches your machine off, instead of entering Power Save Mode. As delivered, this feature is disabled. If enabled the machine automatically switches into Auto Off, 60 minutes after the machine has entered the Low Power mode. The factory default setting of 60 minutes is customer changeable within the range of 0 to 120 minutes. The Auto Off feature is NOT available for networked machines. DocuColor 240/250 Training and Information Guide 12