Xerox DC240 DocuColor 240/250 Training and Information Guide in PDF format. - Page 37

DocuColor 240/250 Loading paper in the Bypass Tray The bypass tray can hold up to 250 sheets of 20lb bond, from 4.0"x6.0" to 13"x19" paper in a variety of different media stock. This procedure shows you how to load transparencies into the bypass tray. 1. Fan the sheets before loading them into the tray. 2. Register the stack of paper or media against the front of the tray. 3. The paper or media must not be loaded above the maximum fill line. 4. Move the front and rear guides to just touch the edges of the stack. Whenever media is loaded into the bypass tray the machine may ask if you have changed the size or the type of media. The Paper Type screen allows you to select the paper type (Heavyweight, Transparency, Tabs, Hole Punched, etc.) from a list of available paper types. If enabled by your System Administrator, the Paper Type screen may also allow you to specify the color of the paper loaded into the tray. After you have made your Paper Type selection (and Paper Color selection, if applicable), touch the Save button. The Paper Size screen allows you to specify the size of the paper you load into the paper tray. The Auto Size Detect option allows standard sized paper loaded in the trays to be automatically detected by the machine. DocuColor 240/250 Training and Information Guide 37