Xerox DC240 DocuColor 240/250 Training and Information Guide in PDF format. - Page 169
Support Center., Cause: The settings for punching are
View all Xerox DC240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 169 highlights
Fault Code 116-705 116-701 116-713 116-780 116-790 123-400 124-705 124-706 124-709 127-210 DocuColor 240/250 Cause/Remedy Refer to 016-795. Cause: 2 sided print could not be made due to insufficient memory. Remedy: Print each side. Cause: Job was divided and printed due to insufficient disk space. Remedy: Remove unnecessary data from the hard disk to increase free disk space. Cause: There is a problem with the document attached to the received mail. Remedy: Check the attached document. Cause: The settings for stapling are canceled and prints the data. Remedy: Confirm the staple position and try to print again. Cause: A malfunction occurred in the machine. Remedy: Power-cycle the machine. If the machine is not improved by performing the relevant remedy, contact your Xerox Customer Support Center. Cause: The settings for punching are canceled. Remedy: Confirm the punching position and try to print again. Cause: The settings for folding are canceled. Remedy: Confirm the folding settings and try to print again. Cause: The number of pages exceeds the number of pages that can be stapled. Remedy: Decrease the number of pages, or cancel the stapling settings, then try to print again. Cause: A malfunction occurred in the machine. Remedy: Power-cycle the machine. If the machine is not improved by performing the relevant remedy, contact your Xerox Customer Support Center. DocuColor 240/250 Training and Information Guide 169