Xerox DC240 DocuColor 240/250 Training and Information Guide in PDF format. - Page 161
Type Priority] is set to [Automatic Tray, Off] in [Paper Type Priority]. 2. Check
View all Xerox DC240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 161 highlights
Fault Code 016-714 016-721 016-735 016-748 016-755 016-756 016-757 016-758 016-759 016-764 DocuColor 240/250 Cause/Remedy Cause: Specified mailbox does not exist. Remedy: Create a new mailbox or specify the existing mailbox. Cause: An error occurred during print processing. Probable causes are as follows: 1. Printing was instructed by [automatic tray selection] when [Paper Type Priority] is set to [Automatic Tray switching Off] for all paper in the [Common Settings]. 2. ESC/P command errorRemedy:1. When printing by automatic tray selection, set one of the paper types to a setting other than [Automatic Tray switching Off] in [Paper Type Priority]. 2. Check print data. Cause: Attempted to print [Job Template List] while updating the job template. Remedy: Retry printing after waiting for a period. Cause: Printing is not possible due to insufficient hard disk space. Remedy: Reduce the number of pages of print data, for example, by dividing up the print data or printing one copy at a time when making multiple copies. Cause: Attempted to process PDF file which was specified to printing prohibited. Remedy: Cancel the printing prohibited specification using Adobe Reader, and try to print again. Cause: No permissions to use the service. Remedy: Check with your System Administrator. Cause: Password is incorrect. Remedy: Enter the correct password. Cause: No Permissions to use service. Remedy: Check with your Auditron Administrator. Cause: Maximum number of pages for this service has been reached. Remedy: Check with your Auditron Administrator. Cause: Can not connect to the SMTP server. Remedy: Contact the SMTP DocuColor 240/250 Training and Information Guide 161