Xerox DC240 DocuColor 240/250 Training and Information Guide in PDF format. - Page 159
Fault Code, Cause/Remedy, Remedy: Place the Adjustment Chart - fault codes
View all Xerox DC240 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 159 highlights
Fault Code 003-760 003-761 003-763 003-795 005-274 012-211 012-260 DocuColor 240/250 Cause/Remedy Cause: An incompatible combination of features are specified in the document scan conditions. Remedy: Check the selected options. Cause: The paper size of the tray selected for auto tray is different from the paper size of the tray selected for Auto Repeat. Remedy: Change the paper size for the tray, or change the [Paper Type Priority] settings. Cause: An error occurred when reading the Gradation Adjustment Chart. Remedy: Place the Adjustment Chart properly on the document glass. Cause: When enlarging/reducing a scanned document to the specified paper size, the reduction/enlargement ratio value exceeds the allowed range. Remedy: Take one of the following actions: • Manually enter a reduction/enlargement ratio. • Change the paper size. Cause: An error occurred in the document feeder. Remedy: Powercycle the machine. Contact your Xerox Customer Support Center. Cause: Finisher malfunctioned. Remedy: Power-cycle the machine. If the machine is not improved by performing the relevant remedy, Contact your Xerox Customer Support Center. Cause: Finisher malfunctioned. Remedy: Power-cycle the machine. If the machine is not improved by performing the relevant remedy, Contact your Xerox Customer Support Center. DocuColor 240/250 Training and Information Guide 159