Xerox DC240 DocuColor 240/250 Training and Information Guide in PDF format. - Page 38

DocuColor 240/250 Loading Paper in the High Capacity Feeder The HCF can hold up to 2000 sheets of 8.5" x 11" 20lb bond. This procedure shows you how to load paper into the High Capacity Feeder. 1. Register the stack of paper or media against the front right side of the paper tray. The paper or media must not be loaded above the maximum fill line. 2. Move the paper guide to just touch the edges of the stack. If enabled by your System Administrator, the Paper Tray settings screen may be displayed on the touch screen. Alternatively, you can change the Paper Size and Paper Type by touching the All Services button on the control panel, then selecting Setup Menu and Paper Tray Attributes on the touch screen. The Paper Type screen allows you to select the paper type (Heavyweight, Transparency, Tabs, Hole Punched, etc.) from a list of available paper types. If enabled by your System Administrator, the Paper Type screen may also allow you to specify the color of the paper loaded into the tray. After you have made your Paper Type selection (and Paper Color selection, if applicable), touch the Save button. This paper tray automatically detects the dimensions of standard sized paper. For standard paper sizes, you will not need to change the Paper Size settings. However, you will need to specify a Paper Size value if you load a non-standard paper size. DocuColor 240/250 Training and Information Guide 38