Xerox DC240 DocuColor 240/250 Training and Information Guide in PDF format. - Page 178

Bypass Tray Jams or Misfeeds, Check that the paper is within specification.8.5x11 to 12x19

Get Xerox DC240 - DocuColor 240 Color Laser PDF manuals and user guides View all Xerox DC240 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 178 highlights

DocuColor 240/250 Bypass Tray Jams or Misfeeds Tray 5 (Bypass) Jams occur in the paper path clearance areas. The machine will display a message indicating the clearance area. If after clearing the jam, the Tray 5 feeder jams or misfeeds again, follow the steps below: • Ensure that the Bypass Tray guides are against the edges of the loaded paper. • Check that the Bypass Tray paper attributes are set correctly. • Check that the paper is within specification.(8.5"x11" to 12"x19", 255 gsm maximum, up to 250 sheets of 80 gsm). • Fan the paper and load it into the bypass tray. Ensure that the paper does not cover the maximum fill line. NOTE: Do not add paper to the tray when paper is already loaded. Instead, remove the paper and combine the additional paper with the paper from the tray and reload. DocuColor 240/250 Training and Information Guide 178

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
DocuColor 240/250
DocuColor 240/250 Training and Information Guide
178
Bypass Tray Jams or Misfeeds
Tray 5 (Bypass) Jams occur in the paper path clearance areas.
The machine will
display a message indicating the clearance area.
If after clearing the jam, the Tray 5 feeder jams or misfeeds again, follow the
steps below:
•
Ensure that the Bypass Tray guides are against the edges of the loaded
paper.
•
Check that the Bypass Tray paper attributes are set correctly.
•
Check that the paper is within specification.(8.5"x11" to 12"x19", 255 gsm
maximum, up to 250 sheets of 80 gsm).
•
Fan the paper and load it into the bypass tray.
Ensure that the paper does
not cover the maximum fill line.
NOTE:
Do not add paper to the tray when paper is already loaded.
Instead,
remove the paper and combine the additional paper with the paper from
the tray and reload.