Yamaha AW16G Owner's Manual - Page 180
Effects Parameters, Reverb Hall, Reverb Room, Reverb Stage, Early Ref., Gate Reverb, Reverse Gate
View all Yamaha AW16G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 180 highlights
Appendix Effects Parameters ■ REVERB HALL, REVERB ROOM, REVERB STAGE, REVERB PLATE Hall, room, stage, and plate simulations, all with gates. Parameter Range Description REV TIME INI.DLY HI.RATIO LO.RATIO DIFF. DENSITY E/R DLY E/R BAL. HPF LPF GATE LVL ATTACK HOLD 0.3-99.0 s 0.0-500.0 ms 0.1-1.0 0.1-2.4 0-10 0-100% 0.0-100.0 ms 0-100% Thru, 21.2 Hz-8.0 kHz 50 Hz-16.0 kHz, Thru OFF, -60 to 0 dB 0-120 ms 0.02 ms-2.13 s Reverb time Initial delay before reverb begins High-frequency reverb time ratio Low-frequency reverb time ratio Reverb diffusion (left-right reverb spread) Reverb density Delay between early reflections and reverb Balance of early reflections and reverb (0% = ER, 100% = reverb) High-pass filter cutoff frequency Low-pass filter cutoff frequency Level at which gate kicks in Gate opening speed Gate open time DECAY 6.0 ms-46.0 s Gate closing speed MIX BAL. 0-100 [%] Mix balance of the effects and dry sounds ■ EARLY REF. Early reflections. Parameter Range TYPE S-Hall, L-Hall, Random, Revers, Plate, Spring ROOMSIZE 0.1-20.0 LIVENESS 0-10 INI.DLY 0.0-500.0 ms DIFF. 0-10 DENSITY 0-100% ER NUM. 1-19 FB.GAIN -99 to +99% HI.RATIO 0.1-1.0 HPF Thru, 21.2 Hz-8.0 kHz LPF 50 Hz-16.0 kHz, Thru MIX BAL. 0-100 [%] Description Type of early reflection simulation Reflection spacing Early reflections decay characteristics (0 = dead, 10 = live) Initial delay before reverb begins Reverb diffusion (left-right reverb spread) Reverb density Number of early reflections Feedback gain High-frequency feedback ratio High-pass filter cutoff frequency Low-pass filter cutoff frequency Mix balance of the effects and dry sounds ■ GATE REVERB, REVERSE GATE Early reflections with gate, and early reflections with reverse gate. Parameter Range Description TYPE Type-A, Type-B Type of early reflection simulation ROOMSIZE 0.1-20.0 Reflection spacing LIVENESS 0-10 Early reflections decay characteristics (0 = dead, 10 = live) INI.DLY 0.0-500.0 ms Initial delay before reverb begins DIFF. 0-10 Reverb diffusion (left-right reverb spread) DENSITY 0-100% Reverb density ER NUM. 1-19 Number of early reflections FB.GAIN -99 to +99% Feedback gain HI.RATIO 0.1-1.0 High-frequency feedback ratio HPF Thru, 21.2 Hz-8.0 kHz High-pass filter cutoff frequency LPF 50 Hz-16.0 kHz, Thru Low-pass filter cutoff frequency MIX BAL. 0-100 [%] Mix balance of the effects and dry sounds 180