Yamaha AW16G Owner's Manual - Page 84
Using the internal effects via send/return
View all Yamaha AW16G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Mixdown and bounce operations Note • If the page is different than shown above, make sure that you have selected track channels as the object of operations. (This is indicated in the upper left of the screen.) If input channels and pad channels are selected, press any one of the [TRACK SEL] keys. • Even if channels are paired, their phase and pan are not linked. Set these parameters individually for each channel. 6 Move the cursor to the PAN knob of each track channel, and turn the [DATA/JOG] dial to adjust the pan setting. Tip! Another way of adjusting the pan is to press a [TRACK SEL] key to select a track channel, and then turn the [PAN/BAL] knob in the Selected Channel section. This method is convenient when you want to adjust the pan without displaying a different screen. If you use the [PAN/BAL] knob to adjust the pan of track channels 9/10-15/16, moving the knob will initially cause only the pan value of one side to change. When that pan value reaches the far right or left, the other pan value will then begin to change. 7 Raise the [STEREO] fader to the 0 dB position. 8 While you play back the song, raise the track channel faders to an appropriate level. If necessary, adjust the EQ and dynamics of each track channel. You can adjust the track channel EQ/dynamics in a similar way as for the input channels; press a [TRACK SEL] key to select a track channel, and use the Selected Channel section [EQ] knob and [DYN] knob. Using the internal effects via send/return You can use the internal effects via send/return to add effects to the mixdown. As an example, here's how to use internal effect 1 in this way. ■ Internally connecting an internal effect via send/return The "Track recording" chapter explained how to insert an internal effect into an input channel by using the input library. If an insert effect has been inserted in a channel, you must first "un-insert" that effect (cancel the insertion) before you can use it in a send/return configuration. 1 Press any [INPUT SEL] key to select an input channel for operations. 2 Repeatedly press the [EFF1] knob or hold down the [EFF1] knob and use the CURSOR [ ]/[ ] keys to access the SEND page of the EFF1 screen. The SEND page of the EFF1 screen will appear. 1 Tip! If the page you see is different than shown above, make sure that input channels are selected as the object of your operations. (This is shown in the upper left of the screen.) If track channels are selected, press one of the [INPUT SEL] keys. 3 Move the cursor to the EFF INSERT field of the channel into which effect 1 is inserted, and press the [ENTER] key. A popup window will ask you to confirm that you want to cancel (release) the effect insertion. 4 Move the cursor to the OK button and press the [ENTER] key. Insertion of insert effect 1 into that channel will be cancelled, and now you are free to use this effect in the mixer section via send/return. 1 EFF INSERT Inserts/cancels an insert effect for a specific channel. The display will indicate "on" for a channel into which an effect is currently inserted. 84