Yamaha AW16G Owner's Manual - Page 29
Playing the demo song
View all Yamaha AW16G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Listening to the demo song Playing the demo song Here's how to play back the demo song you loaded, and adjust the monitor level. 1 Either press the [VIEW] key repeatedly or hold down the [VIEW] key and use the CURSOR [ ]/[ ] keys to access the VIEW screen METER page. 4 To adjust the monitor level appropriately, use the AW16G's [MONITOR PHONES] knob and the volume control of your monitor system. Tip! The demo song uses the Scene function to switch the settings of the mixer. This means that playback will occur using the pre-specified balance - you do not need to operate the faders. 3 5 To stop the song, press the STOP [■] key. The VIEW screen METER page contains meters that show the input level of each channel and the output level of the stereo output channel. It is convenient to display this page when you want to check the level of each track. Note Make sure that the selected channel area at the upper left of the METER page indicates either TRACK 1-8 or TRACK 9/10-15/16. If neither of these are displayed, press either the [TRACK SEL] key 1-8 or 9/10-15/16. 2 Lower the AW16G's [STEREO] fader to the infinity position. Also make sure that the AW16G's [MONITOR PHONES] knob and the volume of your monitor system are turned down. 3 Press the PLAY [ ] key. The demo song will begin playing, and the level of each track channel will be displayed in the METER page of the VIEW screen. 29