Yamaha AW16G Owner's Manual - Page 61
Using the Undo List
View all Yamaha AW16G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Using the Undo List By using the AW16G's Undo function, you can not only cancel the most recent recording or editing operation, but can even backtrack through your work for as many as fifteen previous steps. This is convenient when, for example, after performing several overdubs, you decide that you would rather go back to the state immediately after you had recorded the third solo. 1 Press and hold the [UNDO/REDO] key. The UNDO LIST popup window will appear. 1 1 Undo list This is a list of the previously-performed recording and editing operations. From the left, the list shows a step number that indicates the order in which the operations were performed, the content of the operation, and the track/ virtual track that was affected by the recording or editing operation. The current song is now in the state of the step that is highlighted. The step enclosed by a dotted frame indicates the step to which the Undo function will return the song. 2 Turn the [DATA/JOG] dial to select a step number. 3 Move the cursor to the OK button and press the [ENTER] key. The current song will revert to the state of the step you selected. 4 Move the cursor to the EXIT button and press the [ENTER] key. The popup window will close, and you will return to the previous screen. Note Please note that if you perform recording or editing after "undoing" back to a certain step, the undo/redo data subsequent to that step will be erased. For example if you "undo" the previous three steps, and then perform a recording or editing operation, the undo/redo data for the previous steps 1 and 2 will be erased. 6 61 Overdubbing