Yamaha AW16G Owner's Manual - Page 58
Overdubbing, While monitoring the previously-recorded
View all Yamaha AW16G manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
Overdubbing Overdubbing Now you can overdub onto the track that you selected as the recording-destination. 1 In the Work Navigate section, repeatedly press the [TRACK] key or hold down the [TRACK] key and use the CURSOR [ ]/[ ] keys to access the VIEW page. 2 Move the cursor to the metronome button, and press the [ENTER] key to switch the setting on or off as desired. You can perform overdubbing whether the metronome is on or off. 3 In the transport section, hold down the REC [●] key and press the PLAY [ ] key. The metronome will begin sounding, and the counter display will advance. 4 While monitoring the previously-recorded tracks, play the instrument that you want to overdub. 5 To stop recording, press the STOP [■] key. The [UNDO/REDO] key in the data entry / control section will light. 6 To listen to the recorded performance from the beginning, press the RTZ [ ] key to return the counter display to zero, and press the PLAY [ ] key. Tip! If you recorded from the middle of the song, you can press the [IN] key to move to the location at which you began recording. 7 If you are satisfied with the recorded performance, save the song. (For details on saving → p. 63) If you decide to re-do the recording, press the [UNDO/REDO] key to cancel the recording, and repeat steps 3-7. 58