Biostar VP5200SS16 Administrator Guide - Page 100

3. Setup the BioStar System To check access groups configured in each device: 1. Click Access Control in the shortcut pane. 2. In the task pane, click Manage Access Group in Device. This will open the Device Tree dialog box. 3. Select a device in the Device tree pane. 4. Select Access Group, Timezone, or Hoilday Schedule below the Device tree pane to view how they are configured in each device. The configuration data to the corresponding options will be displayed in the right pane. The data will be highlited in the following colors depending on whether they are applied in the server, a device, or both.  Yellow: Indicates that the configuration data in both the device and the server are identical.  Red: Indicates that the configuration data in the device and the server are different.  Green: Indicates that the configuration data are applied to the device only.  Blue: Indicates that the configuration data are applied to the server only. 5. Optional: Select the data that you want to delete from the device and click Delete from Device in the lower-right corner of the screen. 6. Optional: Select the data that you want to transfer from the server to a device and click Send to Device in the lower-right corner of the screen. 3.9 Setup Time and Attendance BioStar's time and attendance features allow you to define time categories, shifts, and holiday rules. Refer to the procedures in this section as well as the steps in section 3.7.2 to configure time and attendance options. 3.9.1 Add a Time Category To add a time category: 1. Click Time and Attendance in the shortcut pane. 2. In the task pane, click Add Time Category. This will open a Time Category pane similar to the one below. 100 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com