Biostar VP5200SS16 Administrator Guide - Page 58
Con a FaceStation Device
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 58 highlights
3. Setup the BioStar System 3.2.12 Configure a FaceStation Device To configure a FaceStation device: 1. Click Device in the shortcut pane. 2. Double-click a device name in the navigation pane. This will open a Device pane similar to the one below: 3. Configure device information on the following tabs. For an explanation of device settings, see section 5.1.8. Operation mode: Use this tab to set the device time or retrieve it from a host PC and adjust settings for operation modes. Face - Use this tab to specify security level and enrollment sensitivity settings for face recognition. Camera: Use this tab to assign events, by timezone, that can be performed via the camera and the face detection feature. Network: Use this tab to specify settings for LAN or serial connections. Access Control: Use this tab to specify entrance limits and default access groups for an individual device. Interphone : Use this tab to set the device to act as an interphone which allows communication between people on either side of the door. Input: Use this tab to add, modify, or delete input settings for the device. 58 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com