Biostar VP5200SS16 Administrator Guide - Page 241

5. Customize Settings - BioStar Videophone: Choose this option to enable the videophone feature that supports both video and voice calls. The supplied PC software is required. The BioStar vidoephone works only with the device firmware version of BioStation T2 V1.1 or later. When you select IP Interphone in the Type drop-down list, specify the following settings:  VoIP Server IP: Specify an IP address for the VoIP server.  VoIP Phone Number: Specify a phone number for the interphone.  VoIP Display Name: Specify a name to use for communication through the interphone.  VoIP ID: Specify a user name to access the VoIP server.  VoIP Password: Specify a password to access the VoIP server.  VoIP Speaker Gain: Specify the volume of the speaker.  VoIP Mic Gain: Specify the volume of the microphone. 5.1.8.7 Input tab The input tab lists input settings you have specified for a BioStation T2 device. Buttons at the bottom of the tab allow you to add, modify, or delete input settings. To add or modify settings, you must specify them from the Input Setting dialog box. For more information about configuring input settings, see section 3.10.3.2.  Device: Select the BioStation T2 device for which you will add or modify settings.  Port: Select an input port (Input 0, Input 1, or Tamper). For Secure I/O devices, these settings are available: Input 0, Input 1, Input 2, Input 3.  Switch: Click the radio buttons to specify the normal position of the input switch (N/O: normally open or N/C: normally closed).  Function: Select an action to associate with the input: - Not Use: The input port will not be monitored. 241 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com