Biostar VP5200SS16 Administrator Guide - Page 199

5. Customize Settings - Byte Order: Specify whether to swap ID card data between cards and devices by most significant byte (MSB) or least significant byte (LSB). - Bit Order: Specify whether to swap ID card data between cards and devices by most significant bit (MSB) or least significant bit (LSB). 5.1.5.2 Network tab The Network tab allows you to customize network and server settings for Xpass Slim devices.  TCP/IP - Use DHCP: Click this radio button to enable the dynamic host configuration protocol (DHCP) for the device. - Not Use DHCP: Click this radio button to disable the dynamic host configuration protocol (DHCP) for this device. - IP: Specify an IP address for the device. - Subnet: Specify a subnet address for the device. - Gateway: Specify a network gateway. - Port: Specify a port to use for the device.  Server - Use: Click this radio button to use specific server settings. - Not use: Click this radio button to disable server settings. - IP Address: Specify an IP address for the BioStar server. - Time sync with Server: Check this box to synchronize the device' time with the server. The device polls for a time change on the server every one hour and its time will be synchronized with the server when the device's time and the server's time differ by more than 5 seconds.  Support 100 Base-T: This option allows you to enable or disable a fast Ethernet connection for the device. When enabled, the device will detect the Ethernet network and automatically establish the best connection. If 199 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com