Biostar VP5200SS16 Administrator Guide - Page 216
Biostar VP5200SS16 Manual
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 216 highlights
5. Customize Settings 5.1.6.8 Output tab The Output tab lists output settings you have specified for a D-Station device. Buttons at the bottom of the tab allow you to add, modify, or delete output settings. To add or modify settings, you must specify them from the Output Setting dialog box. For more information about configuring output settings, see section 3.10.3.1. Device Type: Select the device type for which you will add or modify settings. Port: select an output port (Relay 0). For Secure I/O devices, these settings are available: Relay 0 or Relay 1. Alarm On Event: Specify settings and click Add to add the event to the Alarm On Event list. These events will activate an alarm. - Event: Select an event that will activate an alarm (Auth Success, Auth Fail, Auth Duress, Anti-passback Fail, Access Not Granted, Entrance Limited, Admin Auth Success, Tamper On, Door Opened, Door Close, Forced Open Door, Held Open Door, Detect Input #1-3). - Device: Select the device to monitor for an alarm event. - Signal Setting: Select a signal setting that you have previously configured from the menu bar (Option > Event > Output Port Setting). - Priority: Set a priority for the event. Only an event with an equal or higher priority (1 is the highest) can override a previous event. For example, an alarm on (activate) event with a priority of 2 can be canceled only by an alarm off (deactivate) event with a priority of 1 or 2. Alarm Off Event: Specify settings and click Add to add the event to the Alarm Off Event list. These events will deactivate an alarm. 216 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com