Biostar VP5200SS16 Administrator Guide - Page 64
Con a Door, Create a Door Group
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
3. Setup the BioStar System 3.3.3 Configure a Door 1. Click Doors in the shortcut pane. 2. Click the name of a door in the navigation pane. This will open a Doors pane similar to the one below: 3. Configure door information on the following tabs. For an explanation of door settings, see section 5.2. Details: Use this tab to control the interaction between doors, devices, locks, and exit buttons. If you add two devices to a door, you can also use this tab to configure anti-passback settings. Alarm: Use this tab to specify what actions to take when the door is forced open or held open. Zone: Use this tab to see the zones associated with a door. Access Control: Use this tab to see the access groups associated with a door. Event: Use this tab to retrieve and monitor an event log for the door. 4. When you are finished configuring the device, click Apply to save your changes. 3.3.4 Create a Door Group You can create groups of doors for easier management. 1. Click Doors in the shortcut pane. 2. In the navigation pane, right-click Doors and click Add Door Group. 3. Type a name for the group and press Enter. 4. To add a door to the group, click and drag a door to the group. 64 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com