Biostar VP5200SS16 Administrator Guide - Page 183

5. Customize Settings 5.1.3.8 Display/Sound tab The Display/Sound tab allows you to customize LED and buzzer behaviors by event. To save changes to these settings, you must click Update in the corresponding section for each event. You can also customize the language used on the device display.  Event: Specify the affected event by selecting it from the drop-down list.  LED: Set the LED behavior for a specified event. - Count: Enter a number of LED cycles for the specified event. Enter "0" to enable an infinite loop or "-1" to disable the LED. - Colors: Specify up to three display colors from the drop-down list. The LED will cycle through these colors in order, from top to bottom. Next to each color, enter the duration (in milliseconds) that the LED should display the selected color and the duration (in milliseconds) that the LED should remain off before advancing to the next color in the cycle.  Buzzer: Set the buzzer behavior for a specified event. - Count: Enter a number of buzzer cycles for the specified event. Enter "0" to enable an infinite loop or "-1" to disable the buzzer. - Volume: Set up to three tone volumes from the drop-down list (Low, Middle, or High). The buzzer will cycle through these volumes in order, from top to bottom. Next to each volume, enter the duration (in milliseconds) that the buzzer should maintain the selected volume and the duration (in milliseconds) that the buzzer should remain off before advancing to the next volume in the cycle. - Fade Out: Set the tone volume to fade out before advancing to the next volume in the cycle by clicking this checkbox.  Language: Set the language to use on the display (Korean, English, or Custom). 183 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com