Biostar VP5200SS16 Administrator Guide - Page 61

3. Setup the BioStar System 3.2.13.2 Configure a pass-through Wiegand format When you select a pass-through format, you can alter the total number of bits and assign the ID bits: 1. After selecting the format in the wizard, click Next to advance to the Wiegand Configuration - Format dialog box. 2. If desired, enter a new total number of bits and click Apply. 3. Click the User ID button (I) on the right. 4. Assign ID bits by clicking the appropriate squares. 5. Click Next until you reach the Wiegand Configuration - Alternative Value dialog box. 6. Click Finish to close the wizard. 3.2.13.3 Configure a custom Wiegand format It is able to change entire bit numbers and parity bit numbers, allocate ID bit and custom ID bit section, define parity bit, and set alternative values for specific output data section by selecting user custom Wiegand type. Configure a custom Wiegand format 1. After selecting the format in the wizard, click Next to advance to the Wiegand Configuration - Format dialog box. 2. If desired, enter a new total number of bits and click Apply. 3. If parity settings have changed, click the Reset parity button. 61 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com