Biostar VP5200SS16 Administrator Guide - Page 62

3. Setup the BioStar System 4. Click the User ID button (I) on the right and assign ID bits by clicking the appropriate squares. 5. Click the Custom ID button on the right, and then click the square, and set the area for custom ID bit. 6. Click the Even Parity button (E) on the right and assign an even parity bit by clicking on the appropriate squares. 7. Click the Odd Parity button (O) on the right and assign an odd parity bit by clicking on the appropriate squares. 8. Click Next. 9. In the Wiegand Configuration - Parity dialog box, select the bits that will be used to calculate the first parity bit. 10. As necessary, click >> and select the bits that will be used to calculate additional parity bits. You must perform this step for each parity bit you assigned in steps 4 and 5. If necessary, you can click Initialize to reset the selection. 11. Click Next. 12. In the Wiegand Configuration - Alternative Value dialog box, select a field to customize (non-ID bits only). 13. Click the Alt Value checkbox and enter a new value for the output string. 14. Repeat steps 10-11 as necessary to customize the rest of the output string. 15. Click Finish to close the wizard. 62 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com