Biostar VP5200SS16 Administrator Guide - Page 213
Max Number of Entrance
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 213 highlights
5. Customize Settings - Time sync with Server: Check this box to synchronize the device' time with the server. The device polls for a time change on the server every one hour and its time will be synchronized with the server when the device's time and the server's time differ by more than 5 seconds. RS485 Network - Mode: Set the mode for a device connected via RS485 (Disable, Host, or Slave). For more information about RS485 modes, please see sections 3.2.1 and 3.2.2. RS485 - Baudrate: Set the baud rate for a device connected via RS485 (9600 to 115200). RS232 - Baudrate: Set the baud rate for a device connected via RS232 (9600 to 115200). USB Setting: Click the radio buttons to enable or disable the USB port on the D-Station device. 5.1.6.5 Access Control tab The Access Control tab allows you to customize entrance limit settings and default access groups for a D-Station device. Entrance Limit Setting - Timed APB (min): Set the duration (in minutes) that a user will be unable to regain entry to an area via the device. Once a user has gained entry, the device will reject the user's card or fingerprint authorization for the time period specified here. - Option 1-4: Click the checkbox to enable an entrance limit setting, and then specify the effective hours for the entrance limit. - Max Number of Entrance: Set the maximum number of entries allowed during the specified time limit. Default Group Setting: Select a default access group to be applied to new users who have not been assigned to another access group. 213 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com