Biostar VP5200SS16 Administrator Guide - Page 86

3. Setup the BioStar System 3.6.4.5 Issue MIFARE or iCLASS template cards MIFARE and iCLASS template cards allow you to store user information and fingerprint templates directly on the card. To register a card for a user: 1. Click User in the shortcut pane. 2. In the navigation pane, click a user's name. 3. In the User pane, click the Card tab. 4. Select "Mifare Template" or "iCLASS Template" from the drop-down list. 5. Click Card Management. This will open the Card Management dialog box. 6. Select a Device ID or USB MIFARE device (if connected) from the drop-down list. 7. If desired, click Bypass Card to allow the user to bypass the fingerprint authentication. 8. Click Read Card. The LED on the device that you selected will begin flashing. 9. Place the card on the device. 10. After the card is read, click OK. 11. Click Apply to issue the card to the user's account. Note: iCLASS 2000, 2002 and 2004 cards are not supported as template cards. 3.6.4.6 Change the MIFARE or iCLASS site key Data encryption for MIFARE and iCLASS cards is governed by a 48-bit site key. Only those cards with appropriate site keys can be read by connected devices. BioStar allows you to define up to two MIFARE and iCLASS site keys (primary and secondary), so that you can change the site key for existing cards. 86 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com