Biostar VP5200SS16 Administrator Guide - Page 71
Add a device to a zone
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
3. Setup the BioStar System 3.5.2.2 Add a device to a zone To implement the protocols of a zone, you must associate devices with the zone. The Details tab (in the Zone pane) contains a Device List that shows each device associated with a zone (see below). To add a device to a zone: 1. Click Doors in the shortcut pane. 2. In the navigation pane, click the name of a zone. 3. In the Zone tab, at the bottom of the Device List, click Add Device. This will open the Add Device dialog box. 4. Select a device (or multiple devices) from the list and click >. Anti-passback zones: When the Select Zone Attribute pop-up appears, select an attribute from the drop-down list (In Device or Out Device). Alarm zones: When the Select Zone Attribute/Type pop-up appears, select a device attribute from the drop-down list (General, Arm, Disarm, or Arm/Disarm). If you select an arm or disarm attribute (or Arm/Disarm), click the Card or Key radio button to specify how to arm or disarm zones, and then press OK. For more information about arming or disarming zones, see section 3.5.2.5. 5. Press Save to add the devices to the list. 71 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com