Biostar VP5200SS16 Administrator Guide - Page 47

3. Setup the BioStar System 5. To apply the same settings to other devices, click Apply to Others and select other devices from the Device Tree dialog box. 3.2.6 Configure a BioEntry Plus or BioEntry W Device To configure a BioEntry Plus or BioEntry W device: 1. Click Device in the shortcut pane. 2. Double-click a device name in the navigation pane. This will open a Device pane similar to the one below: 3. Configure device information on the following tabs. For an explanation of device settings, see section 5.1.2.  Operation mode: Use this tab to set the device time or retrieve it from a host PC, adjust settings for operation modes, and adjust options for fingerprint recognition.  Fingerprint: Use this tab to specify security, quality, matching, and timeout settings for fingerprint recognition.  Network: Use this tab to specify settings for LAN or serial connections.  Access Control: Use this tab to specify entrance limits, access groups, and time and attendance mode settings.  Input: Use this tab to add or modify inputs to the device.  Output: Use this tab to add or modify outputs from the device. 47 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com