Biostar VP5200SS16 Administrator Guide - Page 88

3. Setup the BioStar System  The last block of each sector (blocks 3, 7, 11, and so on) is reserved for site key information.  The card information sector (CIS) occupies three contiguous blocks and should start at the first available block of a sector (blocks 4, 8, 12, and so on).  There should be no overlap between each template's data. To edit the MIFARE layout: 1. From the menu bar, click Option > Mifare Card > Mifare Layout. This will open the Mifare Layout dialog box. 2. Use the drop-down lists and input fields to configure the following parameters of the MIFARE layout:  CIS Index Block: Select the block index to use for header information (4, 8, 12, or 16).  Number of Templates: Select the number of templates to include in the layout (0 to 4).  Template Size: Select the number of bytes to use in the template. The default size is 334 bytes.  Template 1-4 Start Block: Enter the starting block for each fingerprint template. 3. To use the custom layout, click Apply to Devices and select the appropriate device numbers from the Device Tree dialog box. 4. To save your changes, click Save. Note: To reset any changes you have made, click Default. To exit the dialog box without saving changes, click Close. 3.6.4.8 Edit the iCLASS layout BioStar allows you to customize the layout that is used to record user information and fingerprint templates. This layout will be applied to all new iCLASS cards issued with BioEntry Plus iCLASS devices. 88 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com