Biostar VP5200SS16 Administrator Guide - Page 50

3. Setup the BioStar System  Black List: Use this tab to block access through a particular card, e.g. a card which has been stolen or used by a former employee. You can use this feature only when the card mode of the device is set to 'Template on Card'. Adding a user ID or card ID denies access from the users with the matching ID or card.  Display/Sound: Use this tab to configure LED & Buzzer according to the event or status.  T&A: Use this tab to configure time and attendance settings.  Wiegand: Use this tab to configure the Wiegand format. For more information about Wiegand formats, see section 3.2.133. 4. When you are finished configuring the device, click Apply to save your changes. 5. To apply the same settings to other devices, click Apply to Others, select other devices from the Device Tree dialog box, and click Apply. 3.2.8 Configure an Xpass or Xpass Slim Device To configure an Xpass or Xpass Slim device: 1. Click Device in the shortcut pane. 2. Double-click a device name in the navigation pane. This will open a Device pane similar to the one below: 3. Configure device information on the following tabs. For an explanation of device settings, see section 5.1.4 (Xpass) or 5.1.5 (Xpass Slim). 50 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com