Biostar VP5200SS16 Administrator Guide - Page 163

5. Customize Settings In Double mode, setting option which includes an admin user is supported. In Double mode, door relay will not open unless an admin user authenticates within 15 seconds after a normal user authenticates. If this option is not activated, the door relay will open when other two users, regardless of whether being a normal user or an admin user. Note: This feature is supported from the FW versions, BioStation 1.93, BioStation T2 1.3, FaceStation 1.3, BioEntry Plus 1.6, BioEntry W 1.2, BioLite Net 1.4, Xpass 1.3. - Use Wiegand Card Bypass: This feature makes the device to send out Card CSN according to Wiegand setting of BioStar without having to conduct a matching. This is designed to be used as a dummy reader in a connection with a third party access control unit through Wiegand. When a card data input is made, the device sends out the data through Wiegand without going through a matching process. Note: This feature is supported from the FW versions, BioStation 1.93, BioStation T2 1.3, FaceStation 1.3, BioEntry Plus 1.6, BioEntry W 1.2, BioLite Net 1.4, Xpass 1.3..) - Sync with Host PC Time: Check this box to get the time of the lcoal PC which BioStar client program is installed on. The time will be displayed in the Date and Time spin boxes right below this option and you can set the device's time to match this time by clicking Set Time. - Get Time: Get the current time displayed by the device. - Set Time: Set the time on the device.  Operation Mode: For each of the following options, click the corresponding checkbox to enable Double Verification Mode, which requires verification of two users' credentials to gain entry to a door. - All: Set the device to allow all types of authorization (Always, Disable, or custom schedule). - Card + Fingerprint: Set the device to require card plus fingerprint authorization (Always, Disable, or custom schedule). - Only Fingerprint: Set the device to require only fingerprint authorization (Always, Disable, or custom schedule). - Only CARD: Set the device to require only card authorization (Always, Disable, or custom schedule). - Private Auth: Set the device to allow a private authorization method (Disable or Enable). If enabled, the authentication mode of the user will be determined by a user's authorization setting (Private Auth Mode), which is located on the Details tab in the User pane. If disabled, the authentication mode will be determined by the operation mode settings of the device. - Double Verification Mode: Set the device to require verification from two users during a selected schedule (Always, Disable, or custom schedule). 163 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com