Biostar VP5200SS16 Administrator Guide - Page 165
Card ID Format, Format Type, Byte Order, Bit Order, Fingerprint, Security Level, Scan Timeout,
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 165 highlights
5. Customize Settings Card ID Format - Format Type: Set the type of pre-processing to occur on card ID data (Normal or Wiegand). If "Normal" is selected, the card ID data will be processed in its original form. If "Wiegand" is selected, devices will interpret card ID data according to the Wiegand format settings. - Byte Order: Specify whether to swap ID card data between cards and devices by most significant byte (MSB) or least significant byte (LSB). - Bit Order: Specify whether to swap ID card data between cards and devices by most significant bit (MSB) or least significant bit (LSB). 5.1.2.2 Fingerprint tab The Fingerprint tab allows you to customize fingerprint authorization settings for BioEntry Plus or BioEntry W devices. Fingerprint - Security Level: Set the security level to use for fingerprint authorization (Normal, Secure, or Most Secure). Keep in mind that as the security level is increased, so too is the likelihood of a false rejection. - Scan Timeout: Set the length of time before the fingerprint scanner will timeout (1 sec to 20 sec). If a user does not place a finger on the device within the timeout period, the authorization will fail. - Server Matching: Enable this setting to perform fingerprint or card ID matching at the BioStar server, instead of the device. When this mode is enabled, the devices will send the fingerprint template or card ID to the server to verify a match. This mode is useful when you have more users than can be downloaded to a device or user information cannot be distributed due to security concerns. - 1: N Fast Mode: Set the device to use Fast Mode to reduce the amount of time required for matching fingerprints (Auto, Normal, Fast, or Fastest). Setting Fast Mode to Auto will adjust the matching speed according to the number of enrolled templates. - Matching Timeout: Set the length of time before the device will timeout when trying to identify a fingerprint match (0 [Infinite] to 10 sec). 165 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com