Biostar VP5200SS16 Administrator Guide - Page 54
Con an X-Station Device
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
3. Setup the BioStar System Wiegand: Use this tab to configure the Wiegand format. For more information about Wiegand formats, see section 3.2.133. 4. When you are finished configuring the device, click Apply to save your changes. 5. To apply the same settings to other devices, click Apply to Others and select other devices from the Device Tree dialog box. 3.2.10 Configure an X-Station Device To configure an X-Station device: 1. Click Device in the shortcut pane. 2. Double-click a device name in the navigation pane. This will open a Device pane similar to the one below: 3. Configure device information on the following tabs. For an explanation of device settings, see section 5.1.7. Operation mode: Use this tab to set the device time or retrieve it from a host PC and adjust settings for operation modes. Camera: Use this tab to assign events, by timezone, that can be performed via the camera and the face detection feature. Network: Use this tab to specify settings for LAN or serial connections. 54 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com