Biostar VP5200SS16 Administrator Guide - Page 152

5. Customize Settings - Interphone: Set the device to act as an interphone to allow communication between people on either side of the door (Not Use or Use). In Double mode, setting option which includes an admin user is supported. In Double mode, door relay will not open unless an admin user authenticates within 15 seconds after a normal user authenticates. If this option is not activated, the door relay will open when other two users, regardless of whether being a normal user or an admin user. Note:This feature is supported from the FW versions, BioStation 1.93, BioStation T2 1.3, FaceStation 1.3, BioEntry Plus 1.6, BioEntry W 1.2, BioLite Net 1.4, Xpass 1.3. - Use Wiegand Card Bypass: By Wiegand setting in BioStar, this feature exports CSN regardless of whether the authentication is successful or not. This is designed to be used as a dummy reader that doesn't have a door control feature. When a card data input is made, the device sends out the data through Wiegand without going through a matching process. Note:This feature is supported from the FW versions, BioStation 1.93, BioStation T2 1.3, FaceStation 1.3, BioEntry Plus 1.6, BioEntry W 1.2, BioLite Net 1.4, Xpass 1.3. - 5.1.1.2 Fingerprint tab The Fingerprint tab allows you to customize fingerprint authorization settings for BioStation devices.  Fingerprint - Security Level: Set the security level to use for fingerprint authorization (Normal, Secure, or Most Secure). Keep in mind that as the security level is increased, so too is the likelihood of a false rejection. - Image Quality: Set the strictness of the quality check for fingerprint scans (Weak, Normal, or Strict). If a fingerprint image is below the specified quality level, it will be rejected. 152 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com