Biostar VP5200SS16 Administrator Guide - Page 198

5. Customize Settings 5.1.5.1 Operation Mode tab The Operation Mode tab allows you to customize time and various operation modes settings for Xpass Slim devices.  Xpass Slim Time - Date: Manually set the device date with a drop-down calendar. - Time: Manually set the device time. - Sync with Host PC Time: Check this box to get the time of the lcoal PC which BioStar client program is installed on. The time will be displayed in the Date and Time spin boxes right below this option and you can set the device's time to match this time by clicking Set Time. - Get Time: Get the current time displayed by the device. - Set Time: Set the time on the device.  Operation Mode: For each of the following options, click the corresponding checkbox to enable Double Verification Mode, which requires verification of two users' credentials to gain entry to a door. - Card Only: Set the device to require only card authorization (Always, Disable, or custom schedule). - Server Matching: Enable this setting to perform card ID matching at the BioStar server, instead of the device. When this mode is enabled, the device will send card ID to the server to verify a match. This mode is useful when you have more users than can be downloaded to a device or user information cannot be distributed due to security concerns.  Mifare: Mifare template cards are not supported in the Xpass slim device.  Card ID Format - Format Type: Set the type of pre-processing to occur on card ID data (Normal or Wiegand). If "Normal" is selected, the card ID data will be processed in its original form. If "Wiegand" is selected, devices will interpret card ID data according to the Wiegand format settings. 198 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com