Biostar VP5200SS16 Administrator Guide - Page 192

5. Customize Settings - Fixed Exit Time: When the "Auto" T&A mode is selected, specify when to allow exit events by selecting a timezone (Always, Disable, or custom timezone) in the drop-down list. For more information on creating a timezone, please see section 3.7.1. - In Event Caption: Set a caption for check-in. - Out Event Caption: Set a caption for check-out. 5.1.4.4 Input tab The input tab lists input settings you have specified for an Xpass device. Buttons at the bottom of the tab allow you to add, modify, or delete input settings. To add or modify settings, you must specify them from the Input Setting dialog box. For more information about configuring input settings, see section 3.10.3.2.  Device: Select the Xpass (or Secure I/O) device for which you will add or modify settings.  Port: Select an input port (Input 0, Input 1, or Tamper). For Secure I/O devices, these settings are available: Input 0, Input 1, Input 2, Input 3.  Switch: Click the radio buttons to specify the normal position of the input switch (N/O: normally open or N/C: normally closed).  Function: Select an action to associate with the input: - Not Use: The input port will not be monitored. - Generic Input: The input port will be monitored for a triggering action (For the events specified with "Detect Input 1-3" in the Output setting dialog box, please see section 5.1.4.5). - Emergency Open: Open doors controlled by this device. The normal door open period will be ignored and doors will remain open until an operator sends a "Close Door" command via the Door/Zone Monitoring tab (see section 4.4.1). - Release All Alarms: Cancel alarms associated with this device. - Restart Device: Restart the device. 192 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com