Biostar VP5200SS16 Administrator Guide - Page 239
Server Port
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 239 highlights
5. Customize Settings TCP/IP Setting - LAN Type: Select a type of LAN connection from the drop-down list (Disable, Ethernet, or Wireless LAN). - Port: Specify a port to use for the device. WLAN - Change setting: Click to specify settings for a wireless local area network (WLAN). This option is active only when WLAN is selected as the TCP/IP setting. For more information about configuring settings for a WLAN, see section 3.2.4. IP - Use DHCP: Click this radio button to enable the dynamic host configuration protocol (DHCP) for the device. - Not Use DHCP: Click this radio button to disable the dynamic host configuration protocol (DHCP) for this device. - IP Address: Specify an IP address for the device. - Subnet: Specify a subnet address for the device. - Gateway: Specify a network gateway. - Max Conn.: Specify the maximum number of connections to allow. Server - Use: Click this radio button to enable the server mode. - Not use: Click this radio button do disable server settings. - IP Address: Specify an IP address for the BioStar server. - Server Port: Specify the port used to connect to the server. - Time sync with Server: Check this box to synchronize the device' time with the server. The device polls for a time change on the server every one hour and its time will be synchronized with the server when the device's time and the server's time differ by more than 5 seconds. RS485 Network - Mode: Set the mode for a device connected via RS485 (Disable, Host, or Slave). For more information about RS485 modes, please see sections 3.2.1 and 3.2.2. RS485 - Baudrate: Set the baud rate for a device connected via RS485 (9600 to 115200). RS232 - Baudrate: Set the baud rate for a device connected via RS232 (9600 to 115200). USB: Click the radio buttons to enable or disable the USB port on the BioStation T2 device. USB Memory: Click the radio buttons to enable or disable the USB memory on the BioStation T2 device. 239 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com