Biostar VP5200SS16 Administrator Guide - Page 155

5. Customize Settings - Mode: Set the mode for a device connected via RS485 (Disable, Host, Slave, or PC Connection). For more information about RS485 modes, see sections 3.2.1 and 3.2.2. - Baudrate: Set the baud rate for a device connected via RS485 (9600 to 115200).  RS232: Set the baud rate for a device connected via RS232 (9600 to 115200).  USB Setting: Click the radio buttons to enable or disable the USB port on the BioStation device. 5.1.1.4 Access Control tab The Access Control tab allows you to customize entrance limit settings and default access groups for a BioStation device.  Entrance Limit Setting - Timed APB (min): Set the duration (in minutes) that a user will be unable to regain entry to an area via the device. Once a user has gained entry, the device will reject the user's card or fingerprint authorization for the time period specified here. - Option 1-4: Click the checkbox to enable an entrance limit setting, and then specify the effective hours for the entrance limit. - Max Number of Entrance: Set the maximum number of entries allowed during the specified time limit.  Default Group Setting: Select a default access group to be applied to new users who have not been assigned to another access group. 5.1.1.5 Input tab The input tab lists input settings you have specified for a BioStation device. Buttons at the bottom of the tab allow you to add, modify, or delete input settings. To add or modify settings, you must specify them from the Input Setting dialog box. For more information about configuring input settings, see section 3.10.3.2. 155 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com