Biostar VP5200SS16 Administrator Guide - Page 45
Con a BioStation Device
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
3. Setup the BioStar System 7. Optional: If you choose to configure your own wireless LAN by selecting Preset #3 or #4, then specify the following options. Preset Name: Enter a name for the wireless LAN that the device will be connected to. ESSID: Enter the unique ID of the access point. Network Authentication: Select a network authentication mode from the drop-down list (Open System, Shared Key, or WPA-PSK). The authentication mode must be the same for the device and the access point. Encryption Strength: Select an encryption strength from the drop-down list (available options depend on network authentication setting). Network Key: Enter the network key. '_suprema_wpa_' is a pre-defined value for Preset #1 networks (biostation_wpa, biostar_wpa), and '_suprema_wep_' is for Preset #2 networks (biostation_wep, biostar_wep). Confirm Key: re-enter the network key. 8. Click OK to save your changes. 3.2.5 Configure a BioStation Device This section provides an overview of configuring BioStation devices to work with the BioStar software. For more information, refer to the installation guides that accompany your devices. 45 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com