Biostar VP5200SS16 Administrator Guide - Page 79

3. Setup the BioStar System To register fingerprints: 1. Click User in the shortcut pane. 2. In the navigation pane, click a user's name. 3. Click the Fingerprints tab in the User pane. 4. Select the device you will use for scanning fingerprints from the Enroll Device drop-down list. 5. Select a security level from the 1: 1 Security Level drop-down list. 6. Specify any of the following options, as desifred:  Enroll Quality: Set the quality of fingerprints to be enrolled to increase authentification efficiency. The quality of a fingerprint is determined by multiple factors incluing data on its minutiae distribution. You can specify four values (20, 40, 60, 80) and selecting the higher numbers will improve the quality of a fingerprint but can reduce the chances of a fingerprint being enrolled. Please note that this option is only avaiable on BioStar Standard Edition.  Show Fingerprint Image: Specify whether to display a fingerprint image on the screen. Fingerprint images are not saved in the database of BioStar server and you can only save individual images on your PC if necessary. 7. Click Add at the bottom right of the User pane to create an empty slot for registering a fingerprint. 8. In an empty finger slot, press Scan and then have the user place his or her finger on the scanner twice, as prompted by the BioStar interface. 9. If desired, click the checkbox next to the Duress option to set this fingerprint as the duress signal. 10. Repeat steps 6-8 to register the rest of fingerprints. 11. Click Apply to save your changes. 12. Validate the submitted fingerprints by clicking either one or both of the following two options:  Verification Test: Compare a newly-scanned fingerprint to only the stored fingerprint templated collected from a prior enrollment. 79 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com