Biostar VP5200SS16 Administrator Guide - Page 151

5. Customize Settings - Card Only: Set the device to require only card authorization (Always, Disable, or custom schedule). - ID/Card + Fingerprint + Password: Set the device to require ID or card plus fingerprint plus password authorization (Always, Disable, or custom schedule).  Mifare (available only on BioStation Mifare devices) - Not use Mifare: Check this box to disable MIFARE card authorization. - Use Template on Card: Check this box to use the template on the MIFARE card for authorization. - View Mifare Layout: Click this button to view the MIFARE layout used by the device. For more information about configuring MIFARE layouts, please see section 3.6.4.7.  Card ID Format - Format Type: Set the type of pre-processing to occur on card ID data (Normal or Wiegand). If "Normal" is selected, the card ID data will be processed in its original form. If "Wiegand" is selected, devices will interpret card ID data according to the Wiegand format settings. - Byte Order: Specify whether to swap ID card data between cards and devices by most significant byte (MSB) or least significant byte (LSB). - Bit Order: Specify whether to swap ID card data between cards and devices by most significant bit (MSB) or least significant bit (LSB).  Other options - 1: N Schedule: Set a schedule for using fingerprint only authentication (Always, Disable, or custom schedule). - 1: N Operation Mode: Set a method for activating the fingerprint sensor (Auto, Ok/Function Key, or None). - Private Auth: Set the device to allow a private authorization method (Disable or Enable). If enabled, the authentication mode of the user will be determined by a user's "Authorization" setting, which is located on the Details tab. If disabled, the authentication mode will be determined by operation mode settings of the device. - Double Mode: Set the device to require authentication of two users' access cards or fingerprints (Always, Disable, or custom schedule). The timeout for presenting the second authentication is 15 seconds. - Fast ID Matching: Set the device to allow quicker authentication, by requiring users to input only the first two digits of the user ID and scan a single fingerprint (Enable or Disable). This option attempts authentication for a smaller subset of users (only those with the same first two digits in their user IDs) to increase matching speed. Note: This option does not support server matching (see 5.1.1.2). When using function keys for T&A events (see 5.1.1.8), only keys F1-F4 are supported (BioStation V1.7 and higher). 151 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com