Biostar VP5200SS16 Administrator Guide - Page 228
Device, Signal Setting, Option > Event > Output Port, Setting, Priority, Alarm Off Event,
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 228 highlights
5. Customize Settings - Device: Select the device to monitor for an alarm event. - Signal Setting: Select a signal setting that you have previously configured from the menu bar (Option > Event > Output Port Setting). - Priority: Set a priority for the event. Only an event with an equal or higher priority (1 is the highest) can override a previous event. For example, an alarm on (activate) event with a priority of 2 can be canceled only by an alarm off (deactivate) event with a priority of 1 or 2. Alarm Off Event: Specify settings and click Add to add the event to the Alarm Off Event list. These events will deactivate an alarm. - Event: Select an event that will deactivate an alarm (Auth Success, Auth Fail, Auth Duress, Anti-passback Fail, Access Not Granted, Entrance Limited, Admin Auth Success, Tamper On, Door Opened, Door Close, Forced Open Door, Held Open Door, or Detect Input #1-3). - Device: Select the device to monitor for an alarm event. - Priority: Set a priority for the event. Only an event with an equal or higher priority (1 is the highest) can override a previous event. For example, a priority 2 "alarm on" event (activate) can be overridden only by an "alarm off" (deactivate) event with a priority of 1 or 2. 5.1.7.8 Black List tab The Black list tab allows you to register user IDs or access card numbers and prevent them from being authenticated with the device. Current Count: The total number of user IDs and access cards that have been registered. Reserved: The remaining number of user IDs and access cards that can be registered. 228 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com