Biostar VP5200SS16 Administrator Guide - Page 51

3. Setup the BioStar System  Operation mode: Use this tab to set the device time or retrieve it from a host PC, adjust settings for operation modes, and adjust settings for card ID formats. Xpass Slime devices do not support the Mifare template cards.  Network: Use this tab to specify settings for LAN or serial connections.  Access Control: Use this tab to specify entrance limits and access groups.  Input: Use this tab to add or modify inputs to the device.  Output: Use this tab to add or modify outputs from the device.  Command Card: Use this tab to issue command cards that can control Xpass or Xpass Slim devices. For more information about issuing command cards, see section 3.2.8.1.  Display/Sound: Use this tab to configure LED & Buzzer according to the event or status.  Wiegand: Use this tab to configure the Wiegand format. For more information about Wiegand formats, see section 3.2.133. 4. When you are finished configuring the device, click Apply to save your changes. 5. To apply the same settings to other devices, click Apply to Others, select other devices from the Device Tree dialog box, and click Apply. 3.2.8.1 Issue command cards Command cards allow you to enroll and delete users directly from an Xpass or Xpass Slim device. For more information about enrolling users via command cards, see section 3.6.2.3. For more information about deleting an individual or all users via command cards, see section 4.5.1.1 and 4.5.1.2. To issue command cards: 1. Click Device in the shortcut pane. 2. In the navigation pane, click the name of an Xpass device. 3. Click the Command Card tab in the Device pane. 51 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com