Biostar VP5200SS16 Administrator Guide - Page 253
Not Use DHCP, IP Address, Subnet, Gateway, Max Conn., Server, Not use, Server Port, Time sync
View all Biostar VP5200SS16 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 253 highlights
5. Customize Settings - Not Use DHCP: Click this radio button to disable the dynamic host configuration protocol (DHCP) for this device. - IP Address: Specify an IP address for the device. - Subnet: Specify a subnet address for the device. - Gateway: Specify a network gateway. - Max Conn.: Specify the maximum number of connections to allow. Server - Use: Click this radio button to enable the server mode. - Not use: Click this radio button do disable server settings. - IP Address: Specify an IP address for the BioStar server. - Server Port: Specify the port used to connect to the server. - Time sync with Server: Check this box to synchronize the device' time with the server. The device polls for a time change on the server every one hour and its time will be synchronized with the server when the device's time and the server's time differ by more than 5 seconds. RS485 Network - Mode: Set the mode for a device connected via RS485 (Disable, Host, or Slave). For more information about RS485 modes, please see sections 3.2.1 and 3.2.2. RS485 - Baudrate: Set the baud rate for a device connected via RS485 (9600 to 115200). RS232 - Baudrate: Set the baud rate for a device connected via RS232 (9600 to 115200). USB: Click the radio buttons to enable or disable the USB port on the FaceStation device. USB Memory: Click the radio buttons to enable or disable the USB memory on the FaceStation device. 253 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com