Biostar VP5200SS16 Administrator Guide - Page 265

5. Customize Settings  Action - Program Sound: Activate and select a sound from the drop-down list to be emitted by the BioStar program. Then, specify the duration ("play count") of the sound in seconds. If you set the Play Count to 0, the specified sound will play until someone with administrative privileges manually stops the sound via the Realtime Monitoring tab in the Monitoring pane. To add custom sounds to the list, see section 3.10.1.2. - Device Sound: Activate and select a sound to be emitted by devices connected to the door. - Send Email: Activate and setup emails to be sent by the system. For more information about sending alert emails, see section 3.10.2. - Output Device: Activate and select a device to output an alarm signal. - Output Port: Select an output port to use when sending the alarm signal. - Output Signal: Select an output signal to send. 5.3 Customize Zone Settings Customize the way zones function by changing the settings to suit your particular environment and operational needs. To access the tabs described below, click Doors in the shortcut pane, then click a zone name. 5.3.1 Customize Settings for Anti-Passback Zones The sections below describe the settings available for anti-passback zones. Customize the way the zone functions by changing these settings to suit your particular environment and operational needs. 265 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com