Biostar VP5200SS16 Administrator Guide - Page 214

5. Customize Settings 5.1.6.6 Interphone tab The Interphone tab allows you to set the device to act as an interphone to allow communication between people on either side of the door.  Type: Select one of the following options: - Aanlogue Interphone: Choose this option to enable the analogue interphone. - IP Interphone: Choose this option to enable the VoIP feature. A telephone is required. - BioStar Videophone: Choose this option to enable the videophone feature that supports both video and voice calls. The supplied PC software is required. The BioStar vidoephone works only with the device firmware version of FaceStation V1.0 or later. When you select IP Interphone in the Type drop-down list, specify the following settings:  VOIP Server IP: Specify an IP address for VOIP server.  VoIP Display Name: Specify a name to use for communication through the interphone.  VoIP Phone Number: Specify a phone number for the interphone.  VoIP ID: Specify a user name to access the VoIP server.  VoIP Password: Specify a password to access the VoIP server.  Speaker Gain: Specify the volume of the speaker.  Mic Gain: Specify the volume of the microphone. When you select Videophone in the Type drop-down list, specify the following settings:  Mode: Specify the videophone purpose (Single or Extension).  Door Control: Check this option if the videophone is used for door access.  Device Password: Enter the videophone device password. 214 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com