Biostar VP5200SS16 Administrator Guide - Page 248

5. Customize Settings 5.1.8.12 Wiegand tab The Wiegand tab allows you to configure the Wiegand format for a BioStation T2 device. Click Change Format to launch the Wiegand Configuration wizard. For more information on configuring the Wiegand format, see section 3.2.13.  Wiegand Mode: Set the mode of Wiegand input to use when reading card ID data (Legacy or Extended). The Legacy mode will treat connected RF devices as part of their host devices (this is the typical function of previous versions of BioStar). The Extended mode will allow RF card readers to operate independently, which allows them to be associated with doors, included in zones, and leave logs with their own device IDs.  Wiegand In/Out: Assign the Wiegand input or output: - Wiegand (User) In: The ID field of the Wiegand string is interpreted as a user ID. - Wiegand (Card) In: The ID field of the Wiegand string is interpreted as a card ID. - Wiegand (User) Out: Inserts the user ID of the authenticated user in the ID field of the Wiegand string. - Wiegand (Card) Out: Inserts the card ID of the authenticated user in the ID field of the Wiegand string. 5.1.9 Customize Settings for FaceStation Devices The sections below describe the settings available for FaceStation devices. Customize the way FaceStation devices function by changing these settings to suit your particular environment and operational needs. 5.1.9.1 Operation Mode tab The Operation Mode tab allows you to customize time and various operation modes settings for FaceStation devices. 248 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com