Biostar VP5200SS16 Administrator Guide - Page 197

5. Customize Settings 5.1.4.9 Wiegand tab The Wiegand tab allows you to configure the Wiegand format for an Xpass device. Click Change Format to launch the Wiegand Configuration wizard. To activate the Wiegand feature for an Xpass device, click the checkbox at the top right of the tab. For more information on configuring the Wiegand format, see section 3.2.13  Wiegand Mode: Set the mode of Wiegand input to use when reading card ID data (Legacy or Extended). The Legacy mode will treat connected RF devices as part of their host devices (this is the typical function of previous versions of BioStar). The Extended mode will allow RF card readers to operate independently, which allows them to be associated with doors, included in zones, and leave logs with their own device IDs.  Wiegand Input: Assign the Wiegand input: - Disabled: The input will not be used. - Wiegand [Card]: The ID field of the Wiegand string is interpreted as a card ID. - Wiegand [User]: The ID field of the Wiegand string is interpreted as a user ID.  Wiegand Output: Assign the Wiegand output: - Disabled: The output will not be used. - Wiegand [Card]: Inserts the card ID of the authenticated user in the ID field of the Wiegand string. - Wiegand [User]: Inserts the user ID of the authenticated user in the ID field of the Wiegand string. 5.1.5 Customize Settings for Xpass Slim Devices The sections below describe the settings available for Xpass Slim devices. Customize the way Xpass Slim devices function by changing these settings to suit your particular environment and operational needs. 197 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com