Biostar VP5200SS16 Administrator Guide - Page 65

3. Setup the BioStar System 3.4 Setup Elevators (Lifts) This section describes how to setup elevators within the BioStar system. For information about installing physical devices and integrating them with elevator components, refer to the user guide that accompanies each device. BioStar supports up to 128 elevators (lifts). 3.4.1 Add an Elevator To add an elevator: 1. Click Lift in the shortcut pane. 2. In the task pane, click Add New Lift. 3. Right-click New Lift, click Rename, and type a name for the elevator. 3.4.2 Associate a Device With an Elevator BioStar allows you to associate Xpass or Xpass Slim devices with a LIFT I/O device to control access to elevators. The LIFT I/O device must be connected to the Xpass or Xpass Slim device via RS485. To associate an Xpass or Xpass Slim device with an elevator: 1. Click Lifts in the shortcut pane. 2. Right-click an elevator name and click Add Reader. 3. Select an Xpass or Xpass Slim device from the Device Tree dialog box by clicking the checkbox next to a device name. 4. Click OK. 65 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com