Biostar VP5200SS16 Administrator Guide - Page 266

5. Customize Settings 5.3.1.1 Details tab The Details tab allows you to specify which anti-passback type to use for a zone and the reset period for the anti-passback feature.  APB Type: Select a type of anti-passback restriction to apply (Soft or Hard).  Reset Time (min): Set the duration (in minutes) that must pass before the anti-passback status is reset. The default reset time is 0-at this setting, the anti-passback status will not be reset.  In case of Disconnected: Set how doors in the zone should behave if communication is lost between the master and member devices. 5.3.1.2 Alarm tab The Alarm tab allows you to specify alarm actions and an output device for an antipassback zone.  Action - Program Sound: Activate and select a sound from the drop-down list to be emitted by the BioStar program. Then, specify the duration ("play count") of the sound in seconds. If you set the Play Count to 0, the specified sound will play until someone with administrative privileges manually stops the sound via the Realtime Monitoring tab in the Monitoring pane. To add custom sounds to the list, see section 3.10.1.2. - Device Sound: Activate and select a sound to be emitted by devices connected to the door. - Send Email: Activate and setup emails to be sent by the system. For more information about sending alert emails, see section 3.10.2. - Output Device: activate and select a device to output an alarm signal. 266 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com