Biostar VP5200SS16 Administrator Guide - Page 209

5. Customize Settings  Detect Face: Set the device to capture a face image. Upon successful authentication, the captured image is stored in the event log and can be used later for verification purposes.  Face Fusion: Set the device to use face fusion for authentication. This setting can improve authentication rates for some users. This setting can be used in conjunction with either the Fast Mode or the Fusion Mode in the Two Sensor Mode setting.  Fusion Time out: Set the device to automatically time out after a specified number of minutes, if authentication is unsuccessful (1-20).  Interphone: Set the device to act as an interphone to allow communication between people on either side of the door (Not Use or Use).  Other options - Private Auth: Set the device to allow a private authorization method (Disable or Enable). If enabled, the authentication mode of the user will be determined by a user's "Authorization" setting, which is located on the Details tab. If disabled, the authentication mode will be determined by operation mode settings of the device. - Double Mode: Set the device to require authentication of two users' access cards or fingerprints (Always, or No Time). The timeout for presenting the second authentication is 15 seconds.  Mifare - Not use Mifare: Check this box to disable MIFARE card authorization. - Use Template on Card: Ceck this box to use the template on the MIFARE card for authorization. - View Mifare Layout: Click this button to view the MIFARE layout used by the device. For more information about configuring MIFARE layouts, please see section 3.6.4.7.  ISO Format - Format Type: Set the type of pre-processing to occur on card ID data (Normal or Wiegand). If "Normal" is selected, the card ID data will be processed in its original form. If "Wiegand" is selected, devices will interpret card ID data according to the Wiegand format settings. - Byte Order: Specify whether to swap ID card data between cards and devices by most significant byte (MSB) or least significant byte (LSB). - Bit Order: Specify whether to swap ID card data between cards and devices by most significant bit (MSB) or least significant bit (LSB). 209 Copyright ©2014, Suprema Inc. On the web: www.supremainc.com